Installation is simple. Remove the rear wall carpet and attach the rack to the wall. Straight forward. If you want to put the carpet back up, you can trim it down with good scissors or a fresh razor knife. To attach the rack to the wall, we like to use silicone or some other heavy duty adhesive. Or, if you are Ok putting a couple of screws through the back wall, you can use a few to hold it tight into place.

On the newer model Rams, there is a black control module held on the back wall with plastic clips. Remove the clips and re-mount the module to the amp rack. You can relocate the module where ever you want to if you want more room. Just make sure it is mounted in the same orientation as it was mounted on the wall.

The Dodge Ram Amp Rack is constructed of 1/2″ Birch Plywood and covered in thin, black carpet. The plywood works better for holding screws for your equipment than MDF does, and is also lighter. So it works great.

When ordering, please select your cab type, either Crew or Quad, your seat type, 60/40 or solid bench, and if you have the power back window or not. We will then provide you with the proper amp rack to fit your truck.

Crew Cab Dodge Ram trucks have cargo bins under the rear seat floor mats. The Quad Cab Dodge Ram trucks do not.

Made in America with American materials. Nothing but the best!

Dodge Ram Gallery