2007-18 Jeep Wrangler JK Sub Box Large Ported

$333.00

2007-18 Jeep Wrangler JK Sub Box Large Ported

2007-18 Jeep Wrangler has a little more room in the back and the tailgate is a little different from the previous years. This design is a downfire box that fits snuggly in the cargo area. With the tapered front of the box up against the back of the rear seat, if the tailgate is locked, this box would be very difficult to steal. It has 2.68cuft of total airspace, for either two 10s or two 12s with 8 1/2” of mounting depth. Or a single sub can be used in a ported box for more output and deeper bass. A downfire box like this works best in an open air vehicle like a Jeep because the loading effect of the downfire design. It helps to get a little more output since there is no cabin gain in an open air vehicle like this. Short version is downfire is a good way to make the system louder in a Jeep.

This is our ported design can accommodate 1-2 10″ subs or 1 12″ sub. This design is for maximum airspace and the depth of the box can be reduced if desired. This depth allows full access to the storage bin in the floor of the trunk and comes right to the edge of the floor storage lid. Feel free to contact me with any requests.
This is a ported subwoofer box. Ported subwoofer boxes are for customers who want louder, deeper bass with the lower bass more pronounced. Because of the ported design, the bass will not be as tight and punchy as a sealed box, but there is double the bass of a sealed box with the same subs. A sealed subwoofer box has a tight and punchy bass that is more articulate and more true to the music with a more natural sound. If tight, punchy bass is what you want then our sealed box will be what you want.

This is our ported design. This design is for maximum airspace and the airspace of the box can be reduced if desired. Our ported boxes are designed according to your subwoofers specifications. No two boxes will really be alike. At checkout, there is a Comment box, please give us the model number of your subs and we will build the box as needed. We tend to tune our boxes deep, around 34-37hz. If you have any specific requests please feel free to let us know.

This box is made out of 3/4″ MDF and is fully carpeted in matching carpet. The nickle plated spring loaded speaker terminals are mounted on the back of the box and the speaker wires are soldered on for a solid and reliable connection.

Jeep Gallery

Contact Us About Your Options (This is only if your order requires some advanced customization. If you need a customization fee, we’ll let you know).

  • We use Stinger wire on all of our boxes.
  • Please enter the Brand and Model of the subwoofers you will be using.
  • $0.00

Lease-to-own for as low as $14.41/week. Get Started

Additional information

Weight 55 lbs
Dimensions 36 × 15 × 17 in
Total Volume (CuFt)

Mounting Depth

Fit Location

Material

Box Finish

Number of Speakers

Speaker Sizes