|4 × 4 × 2 in
2011-19 Chrysler 300 Alpine Subwoofer Processor Wavtech BassFREQ
This is an Dodge Charger Alpine Subwoofer Line Driver and Line Output Converter for the 12-up Dodge Charger Alpine System. I’ve wanted to make this adapter for a long time and finally tracked down all the parts to do it.
Customers always worry about cutting into the wiring of their brand new trucks, and I get that completely! And that’s exactly what this piece allows you to do.
Simply unbolt the stock Alpine Subwoofer from under the back seat, unplug the connector on the bottom of the plastic enclosure and plug ours in. The wiring harness has around 18″ of slack on the subwoofer wires going to the PAC converter. There are also extensions for the power, ground and remote out wires. The wiring is long enough that you should be able to mount the LinkD converter on the rear wall with your amplifier.
What this kit does it allow you to plug into the Alpine Subwoofer plug for signal. Then, wire the yellow power wire and black ground wire up at your amplifier. The when the converter sees an audio signal it will create the remote turn on signal telling your amplifier to come on. Connect your RCAs from the converter to your amp and you are good to go. Clean and simple. And the WavTech BassFREQ converter has the load resistors built into it so you don’t have to worry about the signal from the amp turning off.
What makes this converter different from a regular line out converter, other than the fantastic build quality, is that is boosts the signal to up to 10v and has a built in clipping light to ensure that you are sending a clean and undistorted signal to your amplifier. Plus, this unit has a full subwoofer bass processor built into it. You have a full subwoofer bass EQ with variable subwoofer bass boost and frequency. What this means is if you are wanting to bring up the deeper bass from your small, sealed box, this unit will let you do that since it is a processor for nothing other than your subwoofer. Plus, the unit comes with a subwoofer knob for up-front control of your subwoofer.
All connections are soldered for the best connection reliability and the whole harness is finished off if factory matching cloth tape.
If you have questions about if this is what you need, feel free to contact us.
Lease-to-own for as low as $13.11/week. Get Started
|4 × 4 × 2 in