Dodge Ram Alpine Subwoofer Line Output Converter

This is an Dodge Ram Alpine Subwoofer Line Output Converter for the 09-up Dodge Ram Alpine System. I’ve wanted to make this adapter for a long time and finally tracked down all the parts to do it.

Customers always worry about cutting into the wiring of their brand new trucks, and I get that completely! And that’s exactly what this piece allows you to do.

This is one of the more plug-n-play options that we have. This uses our regular Dodge Ram Alpine System Subwoofer Plug, found here, and has a PAC LP7-2 Line Output Converter wired up to it.

Simply unbolt the stock Alpine Subwoofer from under the back seat, unplug the connector on the bottom of the plastic enclosure and plug ours in. The wiring harness has around 18″ of slack on the subwoofer wires going to the PAC converter. There are also extensions for the power, ground and remote out wires. The wiring is long enough that you should be able to mount the converter on the rear wall with your amplifier.

What this kit does it allow you to plug into the Alpine Subwoofer plug for signal. Then, wire the yellow power wire and black ground wire up at your amplifier. The when the converter sees an audio signal it will create the remote turn on signal telling your amplifier to come on. Connect your RCAs from the converter to your amp and you are good to go. Clean and simple. And the PAC LP7-2 converter has the load resistors built into it so you don’t have to worry about the signal from the amp turning off.

All connections are soldered for the best connection reliability and the whole harness is finished off if factory matching cloth tape.

If you have questions about if this is what you need, feel free to contact us.

Dodge Products